Microntel®

Solutions

Access Control and security systems Icon

| Time and Attendance systems Icon

| Shop Floor data collection systems Icon

Access Control and security systems - Hardware

Karpos MX 200 Series

Collects, controls and sends Access Control data

Standard Management Interface for 2 readers (T Series - KK Series), with bidirectional magnetic badge reading technology and/or proximity RFID tag, with entry-exit side recognition
Interface for connection to any reader with standard Wiegand or Data-Clock
Digital input/output optocoupled (optional) for signal detection and sending

Karpos Kompact KK801 Series

Identifies the card assigned to the user and allows the insertion of a PIN code by means of keyboard

Back-lighted, high readability graphical display (128 x 64 pixels)
12-key numerical and function keypad
Reading technologies at 125 KHz: Unique, Q5. Reading technologies at 13,56 MHz: Mifare ISO 14443A, ISO 14443B, Long-Range ISO 15693
Loc Bus interface, for connection of up to 8 readers to a single Karpos MX200 Series controller. Maximum range: 400 m (200 m on 2 separate protected channels)

Karpos Kompact KK701 Series

Identifies the card assigned to the user and allows the insertion of a PIN code by means of keyboard

12-key numerical and function keypad
8 status key input LEDs (red) and 3 user LEDs (green)
Reading technologies at 125 KHz: Unique, Q5. Reading technologies at 13,56 MHz: Mifare ISO 14443A, ISO 14443B, Long-Range ISO 15693
Loc Bus interface, for connection of up to 8 readers to a single Karpos MX200 Series controller. Maximum range: 400 m (200 m on 2 separate protected channels)

Karpos Kompact KK101 Series

Identifies the card assigned to the user

Reading Technologies at 125 KHz: Unique, Q5, HITAG 1 and 2. Reading technologies at 13,56 MHz: Mifare ISO 14443A, ISO 14443B
Connection Interface to type M200 Controller by means of TTL signal
2 Status LEDs

Karpos T100 Series

Identifies the card assigned to the user

Magnetic Sliding Badge Reader ISO Trace 2, 4000 Oersted
Reading Technologies at 125 KHz: Unique, Q5, HITAG 1 and 2
Available in Matched Magnetic and Proximity Reading Configuration
Connection Interface to type M200 Controller by means of TTL signal

The hardware Access Control solutions can include the use of KARPOS terminals Series MX 300, 301, 400, 401, A 400 typically designed for Time and Attendance data collection.